ION TOTAL PA GLOW 3 Guia Del Usuario página 8

Operation
Automatic Power Shut-Off
Total PA Glow 3 is equipped with an automatic power shut-off to save energy in compliance with the energy
efficiency regulations for compact audio products. Total PA Glow 3 will enter an energy-saving mode after
20 minutes unless an audio signal at a moderate level is detected from the XLR Input, the Aux Input, the
USB/SD media player, the Radio, or a Bluetooth connection. In energy-saving mode, the display and
lights will turn off and audio playback will be disabled, but the unit will remain powered on in standby.
To resume normal operation, simply turn a knob or press a button on the unit or remote control.
To prevent automatic shut-off, an audio signal should remain active at a moderate volume level from the
XLR Input, the Aux Input, the USB/SD media player, the Radio, or a Bluetooth connection. We
recommend setting audio source (i.e., Aux Input or Bluetooth) volume at max and the Master Volume to 5 or
higher to prevent shut-off. To prevent automatic shut-off when using the microphone by itself, connect to
the XLR Input, set the Aux Input Volume to max, and then adjust the Master Volume until the microphone
is heard.
App Control
IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS
on your device.
Note: Ensure that your device has internet access via your service provider or wireless connection. You can
also download the app on your computer, but remember to connect and sync your device to transfer the
app.
Follow these steps to download the free app on your device:
1. Open the Apple App Store or Google Play on your device.
2. Search for the ION Sound XP app.
3. Follow the on-screen instructions to download and install the app.
4. Once downloaded, the ION Sound XP app will appear on your device's home screen.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Total PA Glow 3.
3. Use the Mode button to select Bluetooth as the audio source, which appears as "bt" in the display.
Total PA Glow 3 will automatically go into pairing mode to search for Bluetooth devices. You will know
you are in pairing mode when the Bluetooth icon is flashing. In addition, automatic voice prompts from
the speaker will alert you of the device's status: Bluetooth Pairing, Bluetooth Connected, or
Bluetooth Disconnected.
4. Navigate to your Bluetooth device's setup screen, find Total PA Glow 3, and connect. The Bluetooth
icon will remain solidly lit.
Note: Users should consider updating their device's OS if experiencing trouble with pairing or playing
music.
5. To disconnect pairing, turn off Bluetooth on your device or select Forget this device on your Bluetooth
device's setup screen.
If you would like to disable (or enable) the voice prompts, press and hold the Play/Pause button on the
Media Panel.
Note: Bluetooth must be selected as the audio source in order to disable (or enable) the voice prompts.
8