Publicidad
Idiomas disponibles
Idiomas disponibles
4. PROGRAMMING - SETTING THE PARAMETERS - INFO MENU 25
Allows visualizing some information about consumptions and about the installed fi rmware version. To log into and set the
parameters enter by a key into the
Machine switch ON. To enter the
keys turn on light blue.
Select the key
25.
In some menu sections it is necessary to modify the single cell (the one with the green background).
Use keys
B
(increase) and
by pressing the key
Start
Use keys
B
(increase) and
selection of every digit by pressing the key
Programming
2 5
Key menu
It appears the available menu. Use keys
the selection by pressing the key
The display shows a screen which confi rms the modifi cation.
INFO MENU
Cycles
Running hours
Water consumption
Flowmeter
Electricity consumption
If no selection is entered within 50 seconds, the machine returns to the previous status.
Press key
On/Off A
to exit without saving the settings.
Referring to consumption, the total value refers from the machine fi rst start up, while the partial value relates to the latest
reset (see paragraph 4.7).
INFO MENU
PARTIAL
000001
(from 01/01/2020)
Total
000001
Cycles
INFO
MENU.
INFO MENU
keep pressed for about 4 seconds, both the
C
(decrease) to select the key
F.
C
(decrease) to select the info password (default 1111) by digiting the single digit. Confi rm the
Start
F. If a wrong password is entered, the relevant warning appears.
B
(increase) and
Start
F.
1/2
4.1 Cycle menu
Use keys
selection by pressing key
N°
The screen displays the total and the partial number of completed cycles.
N°
25
setting the single digits. Confi rm the selection of every digit
Programming
1 1 1 1
Password
C
(decrease) to select the parameter you need to visualize. Confi rm
CONFIRMATION
B
(increase) and
C
(decrease) to select the
Start
F.
On/Off A
and
Start F
keys. The
Password
Wrong
Cycle
menu. Confi rm the
page 41
EN
Publicidad
