Fulgor Milano FCMO 4510 TEM Manual De Instrucciones página 42

3 - General Oven Information
EN
Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort
left inside may melt or burn when the appliance is used.
Error codes
This code appears in the event of the electronic control
indicating a fault. When the error appears, the current
function is blocked. If the type of error is related to a safety
function, the oven becomes unusable and every time a start
attempt is made, the same error appears (in which case
call in the after-sales service), while if the error relates to
a minor fault, after being restarted the oven can be used
for the functions that do not involve the faulty part (e.g., a
heating element).
Beeps
Confirms that the command has been received after a key
has been pressed.
It also indicates that a time function has been completed
(e.g. Timer or Timed Cooking). During the execution of a
recipe, an acoustic signal warns the user that the oven is
waiting for operation by the user (e.g., insert the dish or
turn it over).
Beeps also signal an oven fault.
Default Settings
The cooking modes automatically select a suitable
temperature when the cooking mode is selected, these can
be changed when a different one is needed.
F Failure Number Codes
These codes are displayed when the electronic control
detects a problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup
menu. This error can be communicated to the service
technician so he/she can understand the possible cause of
the problem in advance.
Preheat
Whenever a cooking mode is set and the oven is heating,
the preheating starts, during this period, the instantaneous
temperature is displayed together with the thermometer
icon.
As soon as the 100% is reached, the control sounds an
"end of preheat" tone and the current temperature value
disappears.
10
Locking the keyboard
Hold the key for 3 seconds. Commands are now locked
and a "Key icon" will be displayed.
Repeat the same operation for 3 seconds to unlock the
keyboard.
NOTE: The power off operation is always available.
Timer
WARNING
The timer on your oven does not turn the appliance on
or off, its only purpose is to alert you through the buzzer.
When you want to turn off the oven automatically, use the
end-of-cooking or delayed cooking function.
NOTE: Pressing the OFF button does not reset or stop the
timer.
1. Press the button and set the desired time using the
arrows and confirm with the button
the selection between hours and minutes use the arrows
.
2. The time can be set from 1 minute to 12 hours and 59
minutes and, when set, the remaining time is always
visible in the bottom status bar until the time expires or is
reset.
3. To change or cancel the time set, you must reset the
timer by pressing and holding the button
seconds.
4. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
5. When the time expires, the display shows 00:00 and
the buzzer will sound for one minute or until the button
is pressed.
. To switch
for a few