Fulgor Milano FCMO 4510 TEM Manual De Instrucciones página 47

With the oven on, select the icon
key to enter the SETTINGS menu. This menu permits
setting a number of parameters or special functions. It also
permits accessing the error events list.
1. Press the keys to select the sub menu and confirm
with the key.
SETUP
SERVICE
2. Use this menu to change the following settings:
Press the keys to select the item to be set or to
be displayed from among the three available ones and
confirm with the key.
SYSTEM
EVENT LOGS
MAIN VOLTAGE
DEMO
OM 15
Event Log
The menu permits checking any recorded errors. These
codes can be notified to the after-sales service.
EVENT LOGS
01 12/11/2015 07:06 CODE: F10305
02 17/11/2015 13:17 CODE: F10305
Demo
and confirm with the
The purpose of this function is to set the DEMO mode,
which makes the oven useless for cooking but automatically
performs a demonstration of functions.
1. Press the keys
2. Confirm with the
3. Press the
After about 30 seconds, the oven starts to operate in this
mode.
To temporarily stop the DEMO function, simply keep any
key pressed for a few seconds until the oven switches to
standby. To start it again, press the
To disable the function, enter the DEMO display page and
set OFF. Confirm using the
NOTE: Once set, the function remains enabled even if the
7 - System Setting
to select the item ON.
key.
key.
key.
oven is disconnected from the power mains.
DEMO
ON
EN
key.
15