Publicidad
Idiomas disponibles
Idiomas disponibles
distributor)
Display control
■
When power on the freezer, the display window will be on for 3s, and then it will enter normal operation
display, the original electrified display shall be -18°C;
■
Display of normal operation: ① if there is no failure, the set temperature or function mode will be displayed;
② if there is any failure, the failure code will be displayed;
■
Show sleep function: the sleep function will open by default after electrifying, after the temperature is
confirmed, the display will extinguish after another 30s.
The sleep mode could be switched via combined key:
By pressing the key "
By pressing the key "
Operation control:
■
Open the sleep function. After temperature confirmation for tempering every time, the display area will
extinguish for another 30s;
■
Close the sleep function. After temperature confirmation for tempering every time, the display area will not
extinguish and keep on.
Lock and unlock
After the initial electrification, the key is in lock state by default; it is required to operate after unlocking.
■
Lock: after pressing the key "
temperature will take effect immediately, once entering lock state, the display area will not blink; after no-
key operation for 30s, it could also enter automatic lock state, and the display area will blink once.
■
Unlock: after pressing the key "
the lock state, it is required to conduct key operation after unlock.
The various following key operations shall be implemented under unlock state
The sleep mode setting is also performed in the unlocked state.
Fahrenheit and centigrade temperature conversion
By long pressing key "
When the centigrade temperature is displayed, the centigrade temperature indicator lamp on; and when the
Fahrenheit temperature is display, the Fahrenheit temperature indicator lamp in the display area will be on.
Temperature setting (For settings of -30°C/-22°F, an ambient temperature of 25°C/77°F or
less is recommended)
By pressing the key "
by pressing the key "
" once every time, the refrigerator temperature will change 1 degree Celsius/Fahrenheit;
The specific temperature change is cycled according to the figure below:
Centigrade temperature setting scope:
Fahrenheit temperature setting scope:
" and "
" for 5s simultaneously, it indicates the sleep function is opened.
" and "
" for 5s simultaneously, it indicates the sleep function is closed.
" for continuously 3s, the display area will blink once, and the set
" for continuously 3s, the display area will blink once to unlock. Under
" for 3s, Fahrenheit and centigrade temperature conversion could be implemented.
", the display window will display the refrigerator temperature,
.....
.....
.....
.....
.....
.....
.....
.....
11
EN
Publicidad
