Publicidad
Idiomas disponibles
Idiomas disponibles
3.4. CHANGING THE LIGHT (OPTIONAL)
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent
or similar qualified person.
(Above is only for reference. The actual configuration will depend on the physical product or statement by the
distributor)
3.5. START TO USE
(Above is only for reference. The actual configuration will depend on the physical product or statement by the
■
The top space of the freezer shall be greater than 70cm, and the
distances from both sides and backside shall be more than 20cm
to facilitate heat dissipation.
■
Open the cover plate from the side with the tool.
■
Open the cover plate, take out the power cord, and then cover
the cover plate.
■
After transportation, please let the freezer stay for more than
2 hours before turning on the power, otherwise it will lead to a
decrease in cooling capacity or a damage to the freezer.
■
The freezer shall run 2 to 3 hours before loading fresh or frozen
foods; the freezer shall run for more than 4 hours in summer in
advance considering that the ambient temperature is high.
■
Please pull out the plug in case of power failure or cleaning. Do
not connect the freezer to power supply within five minutes to
prevent damages to the compressor due to successive starts.
13
EN
Publicidad
