Makita DF010DSP Manual De Instrucciones página 4

ENGLISH
(Original instructions)
1 Button
2 Battery cartridge
3 Lock button
4 Switch
SPECIFICATIONS
Model
No load speed (min
Fastening torque
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
CORDLESS DRIVER DRILL SAFETY
WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4
Explanation of general view
5 Adjust grip
6 Pin
7 Adjusting ring
8 Lamp switch
–1
)
Clutch operation
(Clutch auto-stop)
Drill operation
(Clutch does not work)
Straight type
Pistol type
ENE034-1
GEA010-1
GEB088-1
DF010DSP1 DF010DSP2
High speed model
650
Approx. 0.3 N·m – 1.5 N·m
Approx. 1.5 N·m
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
9 Lamp
10 Bit
11 Bit-piece
12 Sleeve
DF010DSP3 DF010DSP4
Low speed model
200
Approx. 0.3 N·m – 3 N·m
Approx. 5 N·m
279 mm
224 mm
0.55 kg
D.C. 7.2 V
battery cartridge,
ENC007-8
read all