Publicidad
Idiomas disponibles
Idiomas disponibles
8. Proceso de programación
Ajuste del interruptor DIP
Tabla 1: Ajuste del interruptor DIP
Dip
6
7
8
NOTE:
1. you must follow the operation instructions above, any malfunction is not allowed during the settings. If your device responds
to your requested function correctly, you have set the function successfully, otherwise repeat the above setting instruction
until your device responds to the requested function.
If the door cannot move, please check if the door is obstructed or the door is too heavy.
Activities covered in this section
- Remote control: Each press of the button makes the door can: close, stop, open or stop its cycle (Single channel mode).
Or the first button is to open, the second button is to close and the third button is to stop (Multi-channel mode).
- Three-Button mode, external switch button (not included). Press "OPEN" button to open the door. Press "STOP" to stop
the door. Press "CLOSE" for the door to close.
KEEP WORKiNG
Keep Working
Dip - interruptor
Función SET
El botón externo de K es para el modo de un solo canal.
El control remoto está en el modo multi-canal.
El control remoto está en el modo de un solo canal.
La función del bloqueo eléctrico está desactivada.
La función del bloqueo eléctrico está activada. El bloqueo
funcionará 0.5 segundos antes de que la puerta se abra y se
detendrá después de que la puerta se abra 2 segundos.
13
M C
5
Publicidad
