Descargar Imprimir esta página

Elite SP500 Manual De Usuario página 36

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL SAFETY
This tool is double insulated; therefore no earth wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
●If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Service Centre in
order to avoid a hazard.
●When using the tool outdoors, only use extension cables intended for outdoor use. A suitable rated
extension cable of up to 30 meters can be used without loss of power.
●Electric safety can be further improved by using a high sensitivity.
EXTENSION CORD
Use only a 3-blade grounding
Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and over heating. If an extension cord is to be used outdoors, it must be marked with
the suffix W-A after the cord type designation. For example, a designation of SJTW-A would indicate that the
cord would be appropriate for outdoor use. For proper size cords see chart.
Guide for extension cord usage:
Warning! Some spray materials contain chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm. To reduced your exposure wear appropriate safety
equipment such as face masks, gloves, and other appropriate protective equipment. Please review
and follow the safety precautions on the paint container.
FEATURES (Fig. A, Fig. A1, Fig. A2 )
1. Spray gun unit
2. Power unit
3. Smart nozzle selector
4. Tip collar
5. Air cap
6. Nozzle (Ø2.0 mm / Ø2.5 mm / Ø3.0 mm)
7. Y-type seal ring
8. Spray width lever
9. Spray tip
10. Spray unit housing
11. Trigger
12. Quick refill lid
13. Sealing liner
14. O-ring
plug and a 3-slot receptacle that will accept the plug an the product.
www.ELITETOOLS.co
Keep Working
11

Publicidad

loading