Publicidad
Idiomas disponibles
Idiomas disponibles
15. Pickup tube
16. Check valve assembly
16.1 Check valve sleeve 1
16.2 Check valve
16.3 Spring
16.4 Check valve sleeve 2
16.5 Valve extension
17. Canister
18. Flow control knob
19. Quick release lock
20. Switch trigger lever
21. Hanging hook
22. Filter
23. Filter cover
24. Viscosity cup
25. Cleaning needle
26. Cleaning brush
27. Spray tip key
SET - UP
Warning! Be sure to use appropriate protective gear and unplug unit.
Warning! Make sure area is well ventilated and free of flammable vapors.
Aligning the pickup tube (Fig. B)
The pickup tube (#15) needs to be aligned in the direction toward the front of the canister (Fig. B). This will
ensure you spray as much material as possible before you need to refill.
Make sure the pickup tube is assembled tight in place.
Attaching spray unit to spray gun handle (Fig.C)
Align the marking line on the spray unit with the icon of unlock, then rotate the spray gun handle clockwise
until stop. Rotate the quick release lock (#19) and snap onto the hook on the edge of canister lid.
www.ELITETOOLS.co
Keep Working
12
Publicidad
