Amana RC517 Serie Manual Del Usuario página 12

Changing User Options
1. Open oven door. Display shows "door".
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press pad 1 for five seconds. After five seconds,
signal sounds. Display shows "P" and active menu.
3. Press hidden enable pad. Locate hidden enable pad
to immediate left and slightly down from MENU 1
pad. Displays shows "OP:1(1-3)".
• "OP" represents optional program mode, first
number represents option number and second
number represents functions currently selected for
option.
4. Press START pad to advance to other options.
See table for options.
Option
End of cycle signal tone
Tone when pad is
pressed
Control panel resets when
door is opened
End of cycle signal
User time limit
*As shipped from factory
5. Press STATUS pad to change option. Press START
pad to save changes.
6. Repeat steps 4-5 to change additional options.
7. Press hidden enable pad to return to programming
mode. Press RESET pad or close oven door to exit
programming mode.
Description Code
Off OP:10
Continuous tone* OP:11
5 continuous tones OP:12
5 tones, 5 cycles OP:13
Off OP:20
On* OP:21
Off* OP:30
On OP:31
Loud* OP:40
Medium OP:41
Off OP:50
On* OP:51
Summary of Optional Programs
1. Open oven door.
2. Press 1 pad for five seconds.
3. Press hidden enable pad.
4. Press START pad to review options.
5. Press STATUS pad to change option.
6. Repeat steps 4-5 to change additional options.
7. Press hidden enable pad to return to
programming mode.
8. Press RESET pad or close oven door.
12