Publicidad
Idiomas disponibles
Idiomas disponibles
5) Current date
alternating with
time
9) Pulse counter 1:
pulse value
alternating with
2)
reading
1)
Up to the end of the month / the 15
shown as 0.
2)
Three pulse inputs are an option. They can be set using the software „Device Monitor".
Level 2 / Technician's Loop:
1) Current power in kW
5) Temperature difference
in K.
(Cooling energy: Value is
displayed negative.)
9) Firmware version
Page 8 of 50
Article no.: 1080621033
6) Information message
(alternating binary and
hexadecimal display)
10) Pulse counter 2:
pulse value
alternating with
reading
2)
th
of the month (for the semimonthly values) the consumption and date will be
2) Current flow in m³/h.
(When negative flow,
value is displayed
negative.)
6) Before start of
operation:
days since manufacture
After start of operation:
days since manufacture
alternating with
days of operation after
reaching an energy value >
10 kWh
2022-02-04
7) Tariff register 1:
value alternating with
tariff register no. and
criteria
11) Pulse counter 3:
pulse value
alternating with
reading
2)
3) Inlet flow temperature
in °C
7) M-bus address
Subject to technical change! Errors excepted.
8) Tariff register 2:
value alternating with
tariff register no. and
criteria
4) Outlet flow
temperature in °C
8) Serial number
Publicidad
