WARninG
Never exceed the maximum inflation pressure shown on the sidewall
of tire.
ReAR TiRe PReSSuRe
The recommended operating rear tire pressure is approximately 20
psi for the rear tires. Check the tire pressure periodically and maintain
equal pressure in both rear tires at all times.
IMPORTANT: Refer to the tire sidewall for exact tire manufacturer's
recommended or maximum psi. Do not overinflate. Uneven tire pres-
sure could cause the cutting deck to mow unevenly.
RePLACinG The TRAiLinG ShieLd
1.
Bend (bow) the trailing shield inward on each side to release tabs
from the holes in the mower frame, Figure 19.
2.
Replace with new trailing shield by bending the shield to allow
each tab to fit into holes in mower frame.
SERVICE AND MAINTENANCE
1
Figure 19