Toto NEOREST TS991A Instrucciones De Montaje página 9

Calibrate the valve
* To calibrate when the outflow temperature is not correctly indicated:
Flow lever
ON/OFF button
of hand shower
Hot side
Temperature
handle
104° F
Push
Cold side
Hand shower
Ring
Temperature
handle
Small screw
1. Turn the flow lever to the
highest position.
2. Push the ON/OFF button of
the hand shower.
Water should come out of
the hand shower.
3. Ignoring the reading on the
scale turn the handle until
the actual temperature of the
water flowing out is 104°F.
4. Remove the temperature
handle
.
Make sure you do not to turn the
temperature handle while detaching it,
remove the small screw and
temperature handle.
Since you have to remove the
ring to do this, be careful not
to lose i t.
8