Publicidad
Idiomas disponibles
Idiomas disponibles
12. Use a 6 mm socket and wrench or 6 mm nut driver to
install NG gas orifice to the end of gas valve.
13. Reinstall front baffle to burner.
IMPORTANT: Check that the orifice is properly installed
inside of the side burner gas valve.
14. Install the 3 screws.
15. Insert igniter junction wire from electronic igniter module.
16. Replace side burner cooking grid and burner cover.
17. Use an adjustable wrench to install Natural gas pressure
regulator and corrugated pipe to the corrugated pipe
connector.
18. Connect the brass connector on one end of the 10 ft (3.0
m) PVC flexible gas supply hose to the Natural gas
pressure regulator (A).
19. Connect the quick connector on the other end of the 10 ft
(3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe (B).
14
A
Publicidad
