Descargar Imprimir esta página

Brandt BFD6510SW Manual De Instrucciones página 42

Frigorífico

Publicidad

Idiomas disponibles

Idiomas disponibles

Space required
• Choose a location that is not directly to sunlight.
• Choose a location with enough space so that the refrigerator can open easily.
• Allow for a safety distance on the right-hand side, left-hand side, back and above the
appliance when installing it. This allows optimising product performance, reduces your
power consumption and therefore limits your electricity bill (see diagram below).
• Make sure that air can freely circulate behind the appliance.
The door of the appliance must be able to open completely, as shown in the diagram.
W×D≥902×1,052mm
Note that this appliance is not designed for built-in installation.
Levelling the appliance
Choose a place to install the refrigerator on a flat surface.
Procedure for adjusting the feet at the front of the product
If the appliance is not level, the doors will not be correctly aligned and
compartment sealing will not be ensured.
To level the appliance laterally, adjust the two adjustable feet on the front of
the product.
Once the appliance is installed, ensure that it is slightly inclined rearwards. In
this way, it will be easier to close the door. If necessary, adjust the setting of
the adjustable feet.
W
Raise
Lower

Publicidad

loading

Este manual también es adecuado para:

Bfd6510sx