Publicidad
Idiomas disponibles
Idiomas disponibles
USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Adjusting the temperature
The thermostat control knob is located on the right wall inside the refrigerator.
"Off" setting: appliance off
"Min" setting: least cold temperature
"Med" setting: normal operation (suitable for most situations)
"Max" setting: coldest temperature
• In high ambient temperatures, for example, in summer, it may be necessary to set the
thermostat to the coldest position ("Max" position). This can force the compressor to run
continuously to maintain a low temperature in the refrigerator.
• When installing the refrigerator for the first time, set the thermostat knob to "Med".
Wait until your refrigerator cools down completely before storing food in it. It is preferable to wait
24 hours before placing food in it.
The thermostat control knob regulates the temperature.
Publicidad
