Candy CIS642SCTT Manual De Instrucciones página 14

If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by touching the "-"and scrolling down to "0".
Or slide along the "—" to the left point, and then touch the "-".
Or touch the left point of "—", and then touching the "-".
Or
Or
Make sure the power display shows "0", then shows "H".
alternately with the heat
and then
and then
and then
EN-13