DeWalt DCR028B Manual De Instrucciones página 9

Fig. D
17
Power/Volume Adjustment (Fig. A)
1. To turn the radio on and off, press the ON/OFF/Volume
button 1 .
2. Turn the ON/OFF/Volume button clockwise to
increase the volume. To decrease the volume,
turn counterclockwise.
nOTE: the volume can also be muted by pressing the
mute button .
6
Mode Function (Fig. A)
To choose one of the mode functions (FM, AM, AUX or
Bluetooth®) push the mode button
function is found.
nOTE: Pressing the Bluetooth® button
into Bluetooth® mode.
Tune or Seek Function (Fig. A)
There are two tuning methods and one seek method for
finding the desired frequency.
To tune:
Press and release the right or left arrow button
until the desired frequency is found.
To seek:
Press and hold the right or left arrow button
2 seconds. The tuner frequency will change to the first radio
station with acceptable clarity and stop at that station.
nOTE: When the radio is paired to a Bluetooth® device the
right and left arrow buttons 3
previous tracks on the audio device.
To Program the Radio Preset Buttons
(Fig. A)
There are six presets for FM and six for AM. After
programming the buttons, pressing 1, 2, 3, 4, 5 or 6 will
instantly change the frequency to the preset station.
1. Turn power on.
2. Set the radio to desired station (see Tune or
Seek Function).
3. Press and hold one of the desired radio preset
buttons 5 until the button number appears on the
right side of the LCD. The radio preset button is now set.
16
until the desired
4
9 also puts the radio
3 . Repeat
for
3
can be used to skip or go to
4. Repeat steps 2 and 3 to set the other radio preset buttons.
To Adjust the EQ (Fig. A)
Sound quality can be adjusted by changing the equalization
of the bass or treble of the radio.
1. Press the EQ button 7 to select bass or treble.
2. Press the right arrow 3 button to increase the selected
setting or the left arrow 3
3. Once desired adjustment is achieved, leave all buttons
released for more than 3 seconds. The procedure
will exit and the equalization adjustment will
remain activated.
Playing Audio from an External
Device (Fig. A, E)
Audio can be played through the radio via a wireless
Bluetooth® connection to a compatible Bluetooth® device
or by connecting audio device or mobile phone using a 1/8"
(3.5 mm) audio cable to the audio port
front control panel.
Fig. E
11
Pairing Radio with a Bluetooth® Audio
Device
1. Place the radio and the Bluetooth® audio source within
3.3' (1 m) of each other.
2. Turn radio on by pressing the ON/OFF/Volume
button 1 .
3. Press the Bluetooth® button
to put the unit into Bluetooth® (BT) mode. The LCD
display 8 will read "Disconnected" if no device is paired.
4. If another device is to be paired, press and hold the
Bluetooth® button for 3 seconds. The LCD display
will read "Ready to pair" and the radio will sound a
single beep.
5. Confirm pairing on your device. (Please consult
your device's instruction manual for specific pairing
instructions.)
6. Once pairing is successful, the radio will sound a double
beep and the LCD display will read "Connected."
nOTE: The radio will sound a downward tone if it
becomes disconnected from the paired device.
Connecting a Previously Paired
Bluetooth® Audio Device
If a Bluetooth® device has been previously paired to
the radio it should automatically reconnect when radio
is powered on. Within 4 seconds the radio will go into
connecting mode. Once the previously paired Bluetooth®
device is recognized and connected, the LCD display will
English
button to decrease it.
10 located on the
10
9 or use the mode button
7