Installation
B
24
English
Untitled-2 24
Untitled-2 24
4. If the washer is not level, turn
the appropriate leveling feet
clockwise (B) to lower the washer, or
counterclockwise (C) to raise the washer
so that it is level.
5. Once you have the washer leveled,
push down on all 4 corners to ensure
that all 4 feet are touching the floor. If
the washer rocks when you push down
on a corner, adjust the leveling foot at
that corner so the foot is firmly on the
floor.
NOTE
• You can also level the washer by lining
a level up with the seam that runs
between the top of the washer and the
body of the washer and checking if the
washer is level on all 4 sides.
• See the diagram above, left. After you
have checked all 4 sides and leveled the
washer, perform Step 5 above.
C
2022-06-29
2022-06-29
3:55:40
3:55:40