GE IM-4B Manual Del Propietário página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you call for service...
Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Problem
Automatic icemaker
does not work
Possible Causes
Freezer compartment
too warm.
Icemaker is not turned on.
Icemaker is not plugged
in correctly.
Water line kinked.
Water supply turned off or
not connected.
Piled up cubes in the storage bin • Level cubes by hand.
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What To Do
• After installing the kit, allow the refrigerator to completely
cool down for 24 hours. Once the compartment is cool,
the icemaker will begin ice production.
• Move the icemaker
feeler arm to the
ON (down) position.
• If using a power cord adapter, make sure that it is fully
connected. Also, check that the icemaker cord plug is fully
inserted into the socket. See Plug in the icemaker.
Hook
• Check that the plastic water
line running from the valve
to the water tube inlet is not
kinked. See Connect the
water line. A kink in the
water line will restrict flow
to the water line.
• After installing the kit, make sure the house water supply
to the refrigerator has been turned on.
• Check that the valve wire
adapter is completely
plugged onto the male
connector plug and the
terminals on the water valve.
See Attach the water valve.
3
GEAppliances.com
Feeler Arm
Feeler Arm in the
Model
STOP (up) position
Feeler Arm in the ON
(down) position
Locking
Tabs
Clip Restraints
onto Locking
Tabs
Adhesive-backed
Fasteners for
Water Tube
Male Connector
Plug
Valve
Terminals

Publicidad

Tabla de contenido
loading

Tabla de contenido