Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Step by step
03
Security key:
Insert the security key into
the appliance plate.
Insert the remote control battery:
Turn the battery cover 90° to the left
and remove the battery cover.
04
Insert the 3V button cell battery
with the model number "CR2032"
or "CR2025" in the battery box, and
make sure that the "+" pole of the
battery is facing in the direction of
the battery cover; cover it in the card
slot and turn it 90° clockwise. Once
the cover is closed, the single battery
head should respond to its lock icon.
Once the battery is in place, press
any key on the remote control, and
the light on the front of the remote
should come on. If the light does not
come on, it means that the remote
control battery is not installed
correctly, and the above actions need
to be repeated.
Emergency stop function: when
the safety key is off, the power
cord is disconnected and the weak
part maintains power. Operation is
not controlled by software.
For your safety, be sure to use the
safety key during use.
NOTE! Tighten all screws and
check
for
omissions
before
connecting to the power cable.
17
EN - MC-120
Publicidad
