Setup Wi-Fi Connection - Explore Scientific WSX3001 Manual De Instrucciones

SETUP WI-FI CONNECTION

1. When you power up the console for the first time, the console LCD will show flashing "AP"
and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI
settings. User can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter
AP mode manually.
2. Use the smart phone, tablet, or computer to connect the console through WI-FI.
3. In PC choose WiFi network settings or In Android / iOS choose setting
console's SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PC (Windows 10) WI-FI network interface
4. Once connected, enter the following IP address into your internet browser's address bar, to
access the console's web interface:
NOTE:
- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.
- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or
Opera.
- WI-FI network interface of PC or mobile subject to change.
WI-FI CONNECTION STATUS
Below is the WI-FI icon status on the console LCD:
Stable: Console is in
connection with WI-FI router
http://192.168.1.1
Flashing: Console is trying to
connect to WI-FI router
14
PWS-XXXXXX
Android WI-FI network interface
Flashing: Console currently in
Access Point (AP) mode
WI-FI to select the