Publicidad
Idiomas disponibles
Idiomas disponibles
> Before start
> Hookup
Basic Playback
AV Component Playback
a
1. Switch the input on the TV to that assigned to
2. Press the input selector (a) on the remote
d
3. Start play on the player.
4. Use VOL+/– (b) to adjust the volume.
b
When a TV is connected to the HDMI OUT
SUB jack
c
Press Q on the remote controller to display the
Quick Menu, and set "Other" – "HDMI Out" to
either "SUB" or "MAIN+SUB".
Listening Mode
This unit is equipped with a variety of listening
modes, and you can select the optimum
listening mode for movies, TV, music, and
games by repeatedly pressing the MOVIE/TV,
MUSIC, and GAME buttons (c). For details on
the listening modes, see the Advanced Manual.
This section introduces some of the popular
modes.
Dolby Digital/DTS modes
When the input signal is a digital surround
format such as Dolby Digital or DTS, you can
select the listening mode that suits the input
signal. Dolby Digital is displayed for Dolby
20
> Setup
the unit.
controller with the same name as the jack to
which you connected the player to switch the
input.
For example, press BD/DVD to play the
player connected to the BD/DVD jack. Press
TV to listen the TV's sound.
0 When the CEC link function works, the
input switches automatically when you
have connected a CEC compliant TV and
player to this unit using HDMI connection.
> Playback
> Part Names
Digital and DTS-HD Master Audio is displayed
for DTS-HD Master Audio. The output is Stereo
for 2-channel input signals.
Direct
This listening mode can be selected for all input
signals. It shuts down processing that affects
sound quality to deliver a playback sound quality
closer to sources. Speakers play the sound field
according to the number of channels in the input
signal, so there would be output from only the
front speakers for a 2 ch signal, for example.
Dolby Surround/DTS Neural:X
These listening modes allow you to expand the
playback signal to 5.1 channels or 7.1 channels
to suit the connected speaker configuration
when the input signal is 2 channels or
5.1 channels.
0 We plan to provide support for the DTS
Neural:X a firmware update for this unit. You
can select Neo:6 Cinema and Neo:6 Music
until the update.
Original surround modes
You can select listening modes such as the All
Ch Stereo mode where a stereo image is played
from both the front and the rear, and Orchestra
(only with the MUSIC button) which is best for
playback of classical and opera pieces.
The listening mode last selected for the source
is remembered for each of the MOVIE/TV,
MUSIC, and GAME buttons. If content you play
is not supported by the listening mode you
selected last, the listening mode that is standard
for that content is selected automatically.
Press
(d) repeatedly to switch the display of
the main unit in order of:
Input source & volume
Listening mode
Signal format
Sampling frequency
Input signal resolution
Publicidad
