Descargar Imprimir esta página

Onkyo TX-RZ610 Manual Básico página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

> Before start
> Hookup
1 6
( P3)
7 8
Height Speakers
Choose one of the following:
$
Front High Speakers
$
Rear High Speakers
> Setup
> Playback
3´ (0.9 m)
or more
> Part Names
For 7.1-Channel System
(with Height Speakers-A)
This is a basic 5.1-channel system with the addition of
height speakers, either as front high speakers or rear high
speakers. Select which speakers to setup according to
the environment of the room. You can select the Dolby
Atmos listening mode (5.1.2 channel playback), which
realizes the most up-to-date 3D surround sound including
overhead sounds, when the input format is Dolby Atmos.
With formats other than Dolby Atmos, you can still create
a sound field by outputting sound from the height
speakers when you select the Dolby Surround listening
mode. Front high speakers or rear high speakers should
be situated at least 0.9 m higher than the front speakers.
Front high speakers should be situated directly above the
front speakers and the distance between the rear high
speakers should match the distance between the front
speakers. Both should be set up facing the listening
position.
* 1: 22e to 30e, * 2: 120e
Go To "Hookup" ( P9)
En
*1
*2
5

Publicidad

loading