Publicidad
Idiomas disponibles
Idiomas disponibles
Sealing fitting bags
1.
3.
1.
Plug in the power cord and turn on the product.
2.
Take the roll and cut it to the desired length. Make sure
you cut in a straight line.
3.
Open the lid of the product and place the open end of
the pouch against the 3 spacers in the vacuum chamber.
4.
Press both sides of the lid until you hear two clicking
sounds.
Note that the product will not work if the lid is not tightly
closed.
5.
Press 'Seal'. The indicator lights will turn on. When the
LED lights turn off again, the sealing process is complete.
6.
Press the release button to remove the bag from the
machine. The bag is now sealed on one side.
How to use
1.
Plug in the power cord and turn on the product.
2.
Place the food in a bag.
3.
Leave at least 6.5 cm of space between the contents and the top of the bag to compress the bag.
4.
Open the product lid and place the bag against the 3 spacers in the vacuum chamber.
5.
Close the lid.
6.
Press both sides of the lid until you hear two clicking sounds.
Note that the product will not work if the lid is not tightly closed.
7.
Select the desired mode based on the food by pressing 'Food'.
8.
Choose the desired container by pressing 'Canister', 'Vac Seal' or 'Seal'. The default mode is 'dry food'
and 'normal'. To avoid flattening delicate food, you can use the 'soft' mode.
9.
When the indicator lights go out, the process is complete.
10.
Press the release button to remove the bag from the machine.
2.
4.
5.
17
Publicidad
