Selecting The Bluetooth Audio Player; Bluetooth Telephone Operations - Clarion NX500 Manual De Instrucciones Y De Instalación

When the pairing operation completes, the
registered Bluetooth audio player is set as
the current device, and the display returns
to the Bluetooth mode screen.
Note:
• You cannot register the same Bluetooth
audio player which is already registered
doubly.
If you wish to change the Device key
registered, once delete the corresponding
Bluetooth audio player from the previous
Device key, and then register it again to your
desired Device key.
• To delete the Bluetooth audio player
registration
1. Touch the [Device] key.
2. Touch the desired Device key you wish to
delete.
A confirmation screen is displayed.
. Touch the [Delete] key to display the Delete
the Device screen.

Selecting the Bluetooth audio player

To change the current Bluetooth audio player to
the other device which is already registered,
perform the following operation.
1. Touch the [Device] key to display the Device
Select screen.
2. Touch the currently connected device, then
press the [Cut] key to disconnect the active
device.
. Touch the desired Device key you wish to
use. Press the [Connect] key to select
it as your active device. The corresponding
Bluetooth audio player is set as the current
device.
• If the power of the Bluetooth audio player
is not turned on, turn it on.
• The Bluetooth audio player may prompt to
acknowledge the Bluetooth connection or
to enter the Pass Key code of this unit.
Perform these operations according to the
message displayed.
4. Touch the [BT Menu] key to return to the
previous screen.
Controlling the Bluetooth audio player
Note:
• Occasionally, depending on the environment,
playback sounds may be fragmented, or
switch noises may be generated.
Playing back a music
After the connection with a Bluetooth audio
player is established, the play mode is
automatically engaged.
• When playback is not started, touch the
[ ] key.
Pausing playback
1. Touch the [ ] key during playback.
Playback pauses.
2. To resume playback, touch the [ ] key.
Playback resumes.
Skipping a track (searching)
1. Press the [ ] or [
playback.
Tracks are skipped, as many as the times
the button is pressed, and playback starts.
Fast forward and fast backward
1. Press and hold the [
during playback.
The system enters the fast backward or fast
forward playback mode during pressing the
button. Releasing the button resumes the
normal speed playback.

Bluetooth Telephone Operations

When the connection with your Bluetooth
cellular phone is established, the following
functions are available on this unit:
• Listening to your telephone calls on the car
speakers.
• Answering to an incoming call.
• Making a call using the Ten-Key pad screen.
• Making a call using the Phone Book data in
the selected cellular phone.
• Making a call using the History data of the
dialed/received calls.
Note:
• Some cellular phones may not be able to
transfer the Phone Book data.
• The Phone Book data transmission may take
a long time. The operations of sending calls
are disabled during the data transmission.
] button during
] or [ ] button
4
NX500/NZ500