Sirius Satellite Radio Operations; Channel Selection - Clarion NX500 Manual De Instrucciones Y De Instalación

Sirius Satellite Radio Operations

This function is available when a Sirius Satellite
Radio Receiver is connected through the
dedicated connection. This unit requires the
following receiver:
SIRIUS Satellite Radio Receiver: SC-C1
Note:
SIRIUS satellite radio is a subscription service.
Please contact Sirius Radio to begin or alter
your subscription:
• Internet: www.sirius.com
Telephone: 888-59-SIRIUS (747487)
Selecting a Satellite Radio mode
Press the [SIRIUS] button on Main Menu
display. The system changes to the Sirius
Satellite Radio mode. The Sirius mode screen is
displayed.
15 14 1 12
1 2  4
1 - Keyboard Button
2 - Previous Channel
Button
 - Store Button
4 - Next Channel Button
5 - Scan Button
6 - Previous Page
Button
7 - Next Page Button
8 - EQ Button
9 - Main Menu Button
10 - Clock Display
Information Displayed During Reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time or
after a reset: "UPDATING" followed by a
percentage of completion.
• When a channel is being tuned in (no signal is
yet received): "ACQUIRING SIGNAL"
• A channel without a broadcast has been
selected: "INVALID CHANNEL"
• A channel not covered by your contract:
"CALL 888-539-SIRIUS"
Call (888) 59-747487 to activate your radio.
0
NX500/NZ500
11 10 9
5 6 7 8
11 - Mute Display
12 - Satellite Signal
1 - Next Category Button
14 - Category Name
15 - Previous Category
Button
16 - Source Display
17 - Song Title
18 - Artist Information
19 - Album Information
20 - Scan Button
• When a channel is out of air time: "OFF AIR"
• When the antenna is disconnected or has
been damaged: "ANTENNA ERROR"
Confirming Your Radio ID
1. Touch the [ ] keyboard button on the
SIRIUS Menu display to display the keypad.
Enter "0" and press "OK".
Your SIRIUS ID (12-digit number) will be
displayed.
2. Touch the [Settings] button on the SIRIUS
Menu display to enter Settings menu.
2. Press [SID] button. Your SIRIUS ID (12-digit
number) will be displayed.

Channel Selection

1. Touch the [Channels] button on the
SIRIUS Menu display to enter channel list
preview mode.
2. Select the channel with the [
Only channels that can be received are
selected.
Channels that are locked and channels not
covered by the contract will be skipped.
The receiver seeks the next available channel
below or above the current channel.
Channel Selection with the channel number
1. Touch the direct access button on the
SIRIUS Menu display to enter direct channel
selection.
2. Enter the channel number of your desired
station by touching the [0] to [9] keys.
If you enter a wrong number, you can cancel
it by touching the [BACK] key.
] or [ ].