Radio Operations - Clarion NX500 Manual De Instrucciones Y De Instalación

Radio Operations

Listening to the Radio
1. Touch the Tuner button on the Main menu
display. The tuner mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1, FM2, FM, AM, FM1...
4 1
5
12
1 14
7
8 9
10
1 - Tuner display
2 - Clock display
 - Main Menu button
4 - Band display
5 - Loc/DX display
6 - Preset list
7 - Seek down
8 - Tune down
9 - Scan button
10 - Tune Up
Seek Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [ ] or [
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Manual Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [ ] or [
automatically seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
22
NX500/NZ500
2 
6
15 16 17
11
11 - Seek Up
12 - Band button
1 - AS/PS button
14 - Loc/DX Button
15 - Previous page
button
16 - Next page button
17 - EQ button
] key to
] key, the station is
] key, the station is
] key to
] key, the station is
] key, the station is
Recalling a preset station
There are 2 ways to recall the preset station.
• Using the remote control:
1. Press the [BAND] button to select the
desire band (FM or AM) on the remote
control.
2. Press the preset number (1 to 6) on
numeric pad.
• Using the tuner unit:
1. Press the [BAND] button to select the
desire band (FM or AM) on the tuner.
2. Press the preset station (1 to 5) on tuner
display.
. Press [ ] or [
or down the preset list.
4. Press [AS] button to auto search and store
the stations.
Manual memory
1. Touch the desired Band key to select the
band you wish to store.
2. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
. Touch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
Auto Store
The Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch and hold the [AS] key to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
] to select next station up