Create THERA MATT PRO Manual Del Usuario página 12

Note: The ground coffee amount can't exceed the MAX mark.
2. Tamp and compress firmly and evenly the ground coffee.
3. Clean any excess of coffee from the rim to ensure proper fit under brew head.
• Place the filter holder:
1. Place the filter holder underneath the brew head, attach the filter holder by first moving
the retainer clip back.
2. Place the handle so that the handle lines up with the open lock icon on the unit and fits
into the groove.
3. Then, slowly turn it to the right until the retention clip is aligned with the closed lock
symbol on the unit.
• Place the cup(s):
• Pull out the drip tray bracket if you are using a small
cup to brew espresso.
• Keep the drip tray bracket inside its compartment if
you are using a larger cup to brew cappuccino.
• Keep the drip tray bracket inside its compartment if
you are using a larger cup to brew latte.
E NGL I SH
12
CAUTION: When brewing cappuccino or latte, please make sure to
adjust the frothing tube lever in order to position the froth milk
dispensing tube inside the cup to be used, additionally, you can
also adjust the length of frothed milk dispensing tube by locking
it onto a different position of the frothing tube lever to adapt to
different sizes of cups. And you can clean it by rotating it out, then
fix it in.