S8 Modules; Using A Blank Module; Using A Res Scan Data Card Module - ResMed S8 AUTOSET VANTAGE Manual Del Usuario

S8 M
ODULES
Note: Do not remove modules while power is connected to the S8 AutoSet Vantage.
Your
S8 A S
UTO
module or a
R
ES
U B M
SING A LANK
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on your
may wish to remove or attach the module, for example to use another module.
To remove the blank module, pull it off the back of the
communications port (F-1).
To attach the blank module, push the blank module onto the data communications
port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a module
attached to the back of the device.
U R S
SING A ES CAN
Please refer to the illustrations in section G of the illustration sheet.
The Data Card module is an accessory to the
R S
ES CAN
Data Card with the Data Card module to collect data and update settings in
R S
ES CAN
the
S8 A S
UTO ET
to data about your treatment, and can provide you with new device settings from your
clinician without your having to leave home.
A
TTACHING THE
To attach the Data Card module, push it onto the data communications port at the
back of your
S8 A
R M
EMOVING THE
To remove the Data Card module, pull it off the back of the
(G-2).
Note: To protect the data communications port, always ensure there is a module
attached to the back of the device.
U D
SING THE ATA
Please refer to the illustrations in section H of the illustration sheet.
If your clinician needs to review your treatment, they will ask you to use the Data Card
to copy data from your
Data Card will be provided in a convenient mailback envelope.
Data that is copied to a Data Card is still stored and available on the
.
V
ANTAGE
It takes up to 30 seconds to copy data onto the Data Card.
will have one of two modules fitted to the back: a blank
V
ET ANTAGE
Data Card module.
S
CAN
ODULE
D C M
ATA ARD ODULE
. The module and card give your clinician convenient access
V
ANTAGE
M
ODULE
until it clicks into place (G-1).
S V
UTO ET ANTAGE
ODULE
C C
ARD TO OLLECT DATA
S8 A S V
UTO ET
S8 A S
UTO ET
S8 C
LASSIC
S8 A
UTO
, and to return the card to them. The
ANTAGE
. At times, you
V
ANTAGE
to show the data
. Use a
S V
ET ANTAGE
S8 A S V
UTO ET ANTAGE
S8 A S
UTO ET
S8 M
ODULES
27