Publicidad
Idiomas disponibles
Idiomas disponibles
slowly anti-clockwise until the thermostat is heard to click off and the lights on the elements
switches turn off as well.
•
After this the heater will keep the air temperature in the room at the set temperature by
switching on and off automatically.
The BP1008 also incorporates an internal fan (Turbo), which can be switched on independent of
the heating elements.
Fan Operation:
•
This is operated by means of the switch with the fan symbol alongside it.
•
The fan will only operate with the thermostat in the "on" position and can be used when the
heating elements are "on" to blow warm air into the room.
•
In warm conditions, the fan can be used with the heating elements "off" to blow cool air into
the room.
CLEANING THE HEATER
•
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
•
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
•
Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
•
When the heater is not used for a long period, it should be protected from dust and stored in a
clean dry place.
SPECIFICATIONS
Electric convection heater 2000W
Perfect for any indoor use or room
Turbo fan function
Adjustable thermostat
Temperature adjustment with 3 heat settings: 750-1250-2000W.
Dual overheat protection
On/Off switch with indicator light
Integrated handles
Dimensions: 53.5 x 19.6 x 38.5 cm.
Weight: 2.5 Kg.
HEATER SWITCHES
FAN SWITCH
(MODEL, TURBO, AND
TURBO&TIMER ONLY)
THERMOSTAT KNOB
CONTROL PANEL
EN
7
Publicidad
