Blaupunkt BP 1001 Manual De Instrucciones página 9

The power cable should be extended to its full lenght to avoid over heating.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate in the home.
Any other use is considered inappropriate and dangerous. Do not insert objects through the safety
grill or the air inlets.
During use, rest the appliance on a flat surface.
Do not use this heating appliance with programmers, timers, separate remote control systems
(different to the ones provided with the appliance) or any other device that automatically turns on
the appliance, as there is a risk of fire in the event the appliance is covered or positioned incorrectly.
Do not use the heater in presence of flammable substances (petrol,paints, etc.).
Do not place the cord near sources of heat.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OR OTHER COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR INLETS TO AVOID OVERHEATING.
TECHNICAL INFORMATIONS
1. Function switch
2. Thermostat
Technical data indicated on the appliance
INSTRUCTIONS FOR USE
The appliance can emit both cold air and hot air depending upon the function selected by means
of the function switch. Make sure that the function switch is in the OFF position before connecting
or disconnecting the appliance.
To turn the appliance on, insert the plug in the power outlet, set the operation switch in the desired
position and turn the temperature switch clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in a counter clockwise
direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature in the room goes below
the set limit.
2
1
EN
9