FEZIBO Brooklyn B Instrucciones De Montaje página 27

English
Description of functions
Key name Description
Raise the
desktop
Lower the
desktop
Set the
1 2 3 S
memory
heights
Move to the
memory
1 2 3
height / To
use memory
heights
Reset
25
Press
Operation process
duration
Press and hold the
raise the desktop and enable
the LED screen to display the
Long press
real-time height value, and
release it to stop the height
adjustment.
Press and hold the
lower the desktop and enable
the LED screen to display the
Long press
real-time height value, and
release it to stop the height
adjustment.
Press the
height value starts flashing. At
this time, press the
Press the
key to save the current height
S
key once
to the corresponding position.
Press the numeral key to
enable the height adjustable
desk to automatically move to
Press the
the corresponding preset
numeral key
height.
once
Reset in the "E-1" or "E-2" alarm
state or in any position: Long
press the
simultaneously for 3s. The LED
screen will display "rst" and
Long
"E-1" alternately. With the
press the
buttons not released during the
and
whole process, the desktop will
buttons
continue moving down to the
simultane-
lowest mechanical zero and
ously for 3s
move back 5mm, and the LED
screen will display the minimum
height of 70.0 or 27.5, which
indicates that the reset is
complete.
key to
key to
S
key once and the
1 2 , or 3
and buttons
Remarks
1. If you press no numeral
key within 15s after the
height value starts flashing
S
or press the key while
the height value is flashing,
you can exit the memory
setting mode.
1. The anti-collision
detection is activated when
moving / adjusting the desk
(height). Desk movement will
stop when there is obstacle
in its path.
2. The movement will stop if
any key is pressed in the
process of movement.
1.All protective functions
are disabled during the
reset process.
2.The reset can also be
performed if the lower
height limit is set.