Pando PFBI CONG 178x54 Manual De Uso página 93

INOXPAN S.L.
• Whenever you press this button, a lower
temperature will be set (-16°C, -18°C,
-20°C, -22°C, -24°C, super freeze).
• When you push the set freezer button
until the super freeze symbol (#2)
appears, and if you do not push any
other button within 1 second, super
freeze will flash.
• If you continue to press it, it will restart
from -16°C.
• The temperature value selected before
super freeze mode or economy mode
is activated and will remain the same
when the mode is over or cancelled. The
appliance continues to operate with this
temperature value.
Recommended Temperature Values for
Freezer
When to adjust
For minimum freezing capacity
In normal usage
For maximum freezing capacity.
Note:Some built-in appliances may have a
stand-by mode.
3.3.5 Stand-By Mode
Purpose
This mode can be used to save energy
when you go on vacation.
How Would It Be Used?
Select "-16" set value.
Push mode and freezer set button for 5
seconds.
Display will show "St" "bY" on the screen.
During This Mode:
In stand-by mode; all components will be
disabled.
If you push the display button, display
will show "St" "bY" on the screen to show
stand-by mode is active.
To cancel; push mode and
button for 5 seconds.
Press the MODE button (no. 3 on the
control panel diagram) until the eco
symbol appears.
After the mode is deactivated, error code
may light on the display because the
Inner
Temperature ( C)
o
-16
-18, -20
-22, -24
freezer set
91
product may be hot. The error code will
turn off when the product reaches normal
temperature.
3.3.6 Door Open Alarm Function
If freezer door is opened more than 2
minutes, appliance sounds 'beep beep'.
3.4 Temperature Settings Warnings
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
• Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your appliance when connecting
or disconnecting to mains, or when
an energy breakdown occurs. Your
appliance will begin to operate normally
after 5 minutes.
Climate class and meaning:
T (tropical): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating
appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This
refrigerating appliance is intended to be
used at ambient temperatures ranging from
10 °C to 32 °C.
FREEZER