Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. Press the knob and assemble the wheel assembly
to a suitable position along the guide rail. Then
loosen the knob and the button will be stuck in the
round hole of the lower straw. The wheel assembly
can be adjusted up and down, and the buttons can
be stuck in different round holes. The user can
adjust the height of the wheel assembly as needed.
4. Press the lock button (11) forward to disengage the
gate.
11
5. Hold the gate open.
6. Insert the wedge part of the mulcher tube into the
pocket.
English
7. Push back the lock button to engage the mulcher
tubes.
11
You can do the steps above in the opposite sequence
to remove the mulcher tubes.
8. Insert the bag adaptor into the blower outlet. Lock
the bag adaptor with the lock button. Hang the hook
on the bag to the the round opening of the lower
straw. To remove the bag, simply press lock button
and remove bag.
8
TIP
Publicidad
