1 - MAIN CHARACTERISTICS (Fig.A)
1 -
Mist outlet
2 -
Lid
3 -
Water tank
4 -
Power cord
A
2
10
8
9
5
2 - PRE-OPERATING INSTRUCTION
2.1 - POSITIONING (Fig.1)
Select a firm, level, flat location at least 15cm from any wall or object for proper air flow. Place
the humidifier on a water-resistant surface, as water can damage furniture and some flooring. Do
not place unit directly on carpet, towels, blankets or other absorbent surfaces.
We will not accept responsibility for damage caused by water spillage.
2.2 - FILLING
Before filling the tank, always make sure that the appliance is disconnected from the power
socket.
a. Separate the tank (3) from the base of the unit (5) as shown in fig 2.
b. Raise the lid (2).
c. Pour drinkable water directly into the tank paying attention not to exceed the "MAX" filling level (Fig.3).
Do not pour flavours or other additives inside the tank. Use the specific compartment (7).
d. Close the lid (2) (Fig.4).
Do not use the humidifier without water inside the tank.
EN - 4
5 -
Body
6 -
Display and control panel
7 -
Flavour compartment
8 -
Led light
1
12
3
7
9 -
Float
10 - Brush
11 - Thermal protection
12 - Purifier filter
1
11
5
4
6
2