Descargar Imprimir esta página

Matrix AURA Serie Manual De Instrucciones página 3

Ocultar thumbs Ver también para AURA Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
PRODUCT INFORMATION
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment,
or any other type of adjustment mechanisms to a comfortable start position.
Make certain that the adjusting mechanism is fully engaged to prevent
unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.
MAINTENANCE CHECKLIST
ACTION
Clean Upholstery
1
Inspect Cables
2
Clean Guide Rods
Inspect Hardware
Inspect Frame
Clean Machine
Clean Grips
1
Lubricate Guide Rods
3
Upholstery & Grips should be cleaned with a mild soap
1
and water or a non-ammonia based cleaner.
Cables should be inspected for cracks or frays and immediately replaced if present.
2
If excessive slack exists cable should be tightened without lifting the head plate.
3
Guide rods should be lubricated with Teflon based lubricant. Apply the
lubricant to a cotton cloth and then apply up and down the guide rods.
FREQUENCY
Daily
Daily
Monthly
Monthly
Bi-Annually
As Needed
As Needed
As Needed
ENGLISH
PRODUCT SPECIFICATIONS
Max User Weight
Max Training Weight (per side)
G3-MSFT 300
G3-MSFT 400
Effective Resistance (per side)
G3-MSFT 300
G3-MSFT 400
Product Weight
G3-MSFT 300
G3-MSFT 400
Overall Dimensions
(L x W x H)*
* Ensure a minimum clearance width of 0.6 meters (24") for access to and
passage around MATRIX strength equipment. Please note, 0.91 meters (36") is
the ADA recommended clearance width for individuals in wheelchairs.
TORQUE VALUES
M12 Bolt (Nyloc Nut & Flowdrill)
M10 Bolt (Nyloc Nut & Flowdrill)
M8 Bolts
M8 Plastic
M6 Bolts
Pad Bolts
3
136 kg / 300 lbs
131 kg / 290 lbs
276 kg / 390 lbs
32.9 kg / 72.5 lbs
44.2 kg / 97.5 lbs
601 kg / 1324 lbs
697 kg / 1537 lbs
170 x 131 x 235 cm /
67 x 52 x 93"
135 Nm / 100 ft-lbs
77 Nm / 57 ft -lbs
25 Nm / 18 ft-lbs
15 Nm / 11 ft-lbs
15 Nm / 11 ft-lbs
10 Nm / 7 ft-lbs

Publicidad

loading

Este manual también es adecuado para:

Aura g3-msft 300Aura g3-msft 400