IKEA LAGAN Manual De Instrucciones página 6

ENGLISH
label. Have the grounding installation made by a qualified
electrician. Do not use the product without grounding in
accordance with local / national regulations.
• The plug or the electrical connection of the product should
be in an easily accessible place (where it will not be affected
by the flame of the stove). If this is not possible, there
should be a mechanism (fuse, switch, switch, etc.) on the
electrical installation to which the product is connected, in
compliance with the electrical regulations and separating all
poles from the network.
• The product must not be connected into the outlet during
installation, repair, and transportation.
• Connect the product into an outlet that meets the voltage
and frequency values specified on the type label.
• (Not all products are supplied with a supply cord, so if
your product DOES NOT have a supply cord) Use only the
connecting cable specified in the "Technical specifications"
section.
• Do not jam the power cord under and behind the product.
Do not put a heavy object on the power cord. The power
cord should not be bent, crushed, and come into contact
with any heat source.
• While the oven is operating, its back surface also gets hot.
Power cords must not touch the back surface, connections
may be damaged.
• Do not jam the electric cables into the oven door and pass
them over hot surfaces. You may cause the oven to short
circuit and catch fire as a result of the cable melting.
• Use original cable only. Do not use cut or damaged cables or
extension leads.
• If the power cord is damaged, it must be replaced by a
manufacturer, an authorized service or a person to be
specified by the importer company in order to prevent
possible dangers.
To download the full version visit www.ikea.com
6