Makita CF003G Manual De Instrucciones página 11

NOTE: After the AC adaptor is connected, the appli-
ance may take 3–5 seconds to start.
NOTE: The adaptor might creak while using it for the
power supply. This doesn't affect normal use.
NOTE: Even operating in DC power mode, the appli-
ance is automatically changed into AC power mode
when plugged in.
NOTE: When the cordless fan switches the power
mode from DC to AC, and vice versa, the wind speed
may change temporarily.
NOTE: The AC adaptor does not charge the battery
inserted to the appliance.
MAKPAC cart
Optional accessory
CAUTION:
Make sure that MAKPAC cart is
securely attached to the appliance. The appliance
may come off MAKPAC cart and falling accident may
occur.
By attaching the appliance to MAKPAC cart, it can be
moved around while working.
When using MAKPAC cart, attach the appliance to
MAKPAC cart as shown below.
► Fig.11
NOTICE:
Lock the stopper when not moving
MAKPAC cart.
► Fig.12: 1. Stopper
MAINTENANCE
CAUTION:
Always be sure that the appliance
is switched off, unplugged, and the battery car-
tridge is removed before attempting to perform
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
General maintenance
After the appliance is cooled, use clean clothes to
remove dirt, dust, oil, grease etc.
WARNING:
All parts should be replaced at an
Authorized Service Center.
Fan Cleaning
CAUTION:
Ensure that the fan is switched off
from the supply mains before removing the guard.
When cleaning the inside of fan-cover, loosen the
screws on the front of the fan cover and remove
fan-cover.
► Fig.13: 1. Screw
► Fig.14: 1. Fan-cover
Wipe off the fan and fan-cover using a cloth dampened
in soapy water.
CAUTION:
Always make sure that the fan-
cover is attached before use.
CAUTION:
Attach the fan-cover securely. If
the fan-cover is attached halfway or incorrectly, it may
come off and result in personal injury or damage to
the appliance.
NOTICE:
Avoid applying too much load on the
fan-cover. It may lead to breakage.
Storage
To prevent fire or burning, allow the appliance to cool
down completely before you store it. Do not store the
discharged battery for long periods, as it can shorten its
service life.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita appli-
ance specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• MAKPAC cart
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
11 ENGLISH