Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
Square drive
No load speed (RPM)
Impacts per minute
Max. fastening torque
(at max impact mode (4) )
Nut-Busting torque
(at max impact mode (4) )
Overall length
Rated voltage
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Standard bolt
High tensile bolt
Max impact mode (4)
Hard impact mode (3)
Medium impact mode (2)
Soft impact mode (1)
Max impact mode (4)
Hard impact mode (3)
Medium impact mode (2)
Soft impact mode (1)
Fastening with M30 for 6 seconds
Fastening with M30 for 3 seconds
M12 - M36 (1/2" - 1-7/16")
M10 - M27 (3/8" - 1-1/16")
1,800 N·m (1,330 ft·lbs)
1,500 N·m (1,110 ft·lbs)
2,050 N·m (1,510 ft·lbs)
D.C. 36 V - 40 V max
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2 ENGLISH
GWT01
19.0 mm (3/4")
0 - 1,800 /min
0 - 1,400 /min
0 - 1,150 /min
0 - 950 /min
0 - 2,500 /min
0 - 2,400 /min
0 - 2,200 /min
0 - 1,900 /min
217 mm (8-1/2")
3.9 - 4.2 kg
(8.6 - 9.3 lbs)
BL4025 / BL4040
DC40RA
Publicidad
