Cafe CEP9030 Manual Del Propietário página 8

Element Cycling
Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:
Operating The Cooking Elements
Turn Burner(s) On: Touch and hold On/Off pad about
half a second. A chime can be heard with each touch to
any pad.
Power level can be selected in any of the following ways:
1. Swipe the gray arc to the desired power level.
2. Touch Anywhere along the gray arc, or;
Gray Arc
Swipe Area
Adjust Burner Size
The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner
ring graphic.
8
3. Touch or V pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the V pad.
Single Surface
Element Element
Tri-Ring Surface
Element
49-2001129 Rev. 2