Ariston 3319483 Instrucciones De Instalacion Y Uso página 37

OPTIMISATION
The timer-controlled thermostat is equipped with an optimisation function that helps to save
energy while maintaining optimal comfort levels. If the optimisation function is enabled, the
display will show the
the installation guide for its activation.
• Optimal start memorises the duration required for reaching the set temperature inside the
home, therefore, if necessary, switch on the heating function a little earlier so that it can reach
this temperature at the scheduled time.
• Delayed start saves energy by slightly delaying the start of heating on the basis of the differ-
ence between the set temperature and the room temperature. The more these temperatures
are close the longer the delay.
• Optimal stop saves energy by switching off the heating function a little earlier than the sched-
uled time. If the home is at the right temperature, you will not notice any effect on the temper-
ature, but you should notice the difference in the energy bill.
icon. By default the function is disabled – consult the instructions in
GB / 37