asalvo TRIO ROMA II Manual De Instrucciones página 43

REMOVING OF THE CAR SEAT FROM THE STROLLER FRAME
To remove the car seat from the frame, lift simultaneously the two le-
vers for quick release of the adaptor and pull out the car seat from the
frame. Stow the levers back.
IMPORTANT! ALL INSTRUCTIONS FOR USE AND MAINTENANCE OF
THE CAR SEAT ARE IN A SEPARATE MANUAL, SUPPLIED WITH THE CAR
SEAT PACKAGE.
CARE AND MAINTENANCE GUIDELINES
1. Regularly check all locking mechanisms, parking device, safety harnesses and
buckles, joints and fixing mechanisms to make sure that they function properly
and are not damaged or worn out.
2. Should you find loose, torn or damaged parts, they need to be repaired or replaced.
3. Parking devices and wheels wear out faster than other parts. Replace them when
necessary.
4. Regularly oil the driving mechanisms. Renew the rivets when necessary. It is
recommendable to use silicone spray for oiling.
5. Dirty metal or plastic parts impede the normal function of your stroller. Clean your
stroller regularly and after that oil it.
6. The fabric of inside the carry cot, canopy and foot cover of carry cot can be
removed and hand washed at 30ºC.
7. Clean the fabrics, plastic parts and metal parts of the stroller with damp cotton
cloth or sponge and water or mild soap.
43