Publicidad
Idiomas disponibles
Idiomas disponibles
2610056537 GAL18V-20 10-19.qxp_GAL18V-40 10/23/19 9:32 AM Page 6
Charger Indicators, symbols and meaning
If the indicator lights are "OFF", the
charger is not receiving power from power
supply outlet.
battery pack is fully charged, or the battery
pack is too hot or cold for fast-charging.
Plug charger cord into your standard power
outlet.
With no battery pack inserted, the
charger's green indicator light will go ON.
This indicates the charger is receiving
power and the charger is ready for
operation.
When you insert the battery
pack 1 into the charger. The
charger's green indicator light
3 will begin to "BLINK". This
indicates that the battery is receiving a fast
charge.
The purpose of the rapidly "BLINKING"
green light is to indicate that the battery
pack is fast-charging. It does not indicate
the exact point of full charge. The light will
stop blinking when battery is fully charged.
Continuous green battery
charger light 3 indicates that
the battery is fully charged.
However, the battery pack may
be used at any time, even if the green light
is still blinking.
A steady green indicator light 3
could also mean that the
battery pack is outside the
proper temperature ranges (too
hot or too cold) so the charger will not
begin the charging process. Charging (Fast
or long Life Charging Mode) is only
possible when the temperature range of
the battery pack is between 32°F (0°C) and
113°F (45°C).
If the green indicator light
is "ON", the charger is
plugged in but the battery
pack is not inserted, or the
Charging Battery Pack
The charger will automatically switch to
fast-charging once a suitable temperature
is reached.
If the green indicator light is
"BLINKING", the battery pack
is being fast-charged. Fast-
charging will automatically
stop when the battery pack is fully charged.
As soon as the battery pack reaches the
correct temperature range, the battery
charger will automatically switch to fast
charging.
If the indicator light 3 is
continuous green, the battery
pack cannot accept a charge.
This may be due to the
contacts on the charger or battery pack
being contaminated, the battery pack itself
may be defective, or battery may be wrong
type for this charger.
•
Confirm battery compatibility with
charger by checking list of genuine
Bosch battery packs outlined on page
5 of this manual.
•
If
applicable,
compatible battery pack into charger
to verify charger is working properly.
•
Clean the contacts of the charger or
battery pack (e. g. by using a cotton
swab and alcohol on battery and
charger terminals or inserting and
removing the battery several times) or
replace the battery pack, as required.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool.
6
insert
another
Publicidad
