Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Electrical Connection
WARNING
Failure to follow these instructions can result in death,fire, or electric shock.
to excessive voltage drop at the refrigerator connection which decreases the cooling
performance of the refrigerator, and cause the wires to overheat possibly causing a
• Before beginning the installation, disconnect power by removing refrigerator circuit
• Turn the control knob to the OFF position.
• Locate and remove the seven screws of the lower rear unit cover as indicated using
a Phillips screwdriver.
• Locate the power supply connection terminal block on the left side of the compressor
compartment.
12
ELECTRICAL SHOCK HAZARD
Supply
Maximum Supply
Wire Size
12 AWG
8 AWG
Power Supply
Connection
Terminal Block
Connect
Supply Wires
Line Length
Install Strain
Relief Clip
49-1000399 Rev. 3
Publicidad
