Valid Standards And Directives - WIKA GPD-1000 Manual De Instrucciones

3. Safety
Danger caused by decomposition products
Insulating gas in electrical systems may contain decomposition products generated by
electric arcs:
EN
Gaseous sulphur fluorides
■
Sulphur hexafluorides
■
Solid and atomized metal fluorides, metal sulphides, metal oxides
■
Hydrogen fluoride
■
Sulphur dioxide
■
Decomposition products can be harmful to health.
■
They can cause poisoning by inhalation, ingestion or contact with the skin.
■
They may be irritating to the eyes, the respiratory system or the skin and burn them.
■
Inhalation of large quantities may damage the lungs.
■
Observe the following safety instructions in order to avoid danger from insulating gas:
Wear personal protective equipment.
■
Read the material safety data sheet of the gas supplier.
■
With large leaks, evacuate the area quickly.
■
Ensure good ventilation.
■

3.8 Valid standards and directives

Installation, assembly, commissioning:
DGUV Information 213-013 (SF₆ systems and equipment)
■
IEC 62271-4:2013 (High-voltage switchgear and controlgear - Part 4: Handling
■
procedures for sulphur hexafluoride (SF₆) and its mixtures)
IEC 60376:2018 (Specification of technical grade sulphur hexafluoride (SF₆) and
■
complementary gases to be used in its mixtures for use in electrical equipment)
IEC 60480 (Specifications for the re-use of sulphur hexafluoride (SF₆) and its
■
mixtures in electrical equipment)
CIGRE report 276, 2005 (Guide for the preparation of customised "Practical SF₆
■
handling instructions")
Leaks during operation:
IEC 60376:2018 (Specification of technical grade sulphur hexafluoride (SF₆) and
■
complementary gases to be used in its mixtures for use in electrical equipment)
IEC 60480 (Specifications for the re-use of sulphur hexafluoride (SF₆) and its
■
mixtures in electrical equipment)
CIGRE 2002 ("SF₆ gas in the electrical industry")
■
10 WIKA operating instructions gas presence detector, model GPD-1000