Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
Time
When (Warm) or (Cool) or (Refresh) programme is selected, you can use (Time) button to set the drying
time in 10-minute intervals.
Intensity
You can adjust the drying level of the laundry by pressing the (Intensity) button.
There are four levels.
1. The Intensity function can only be activated before the programme starts.
2. Press the (Intensity) button repeatedly to increase the degree of drying.
3. Except for the programmes (Cotton), (Delicate), (Wool), (Hot), (Cold), (Cool), all other programmes
can be set with the (Intensity) function.
Light
The drum light will be on for 3 minutes when the button is pressed and for 1 minute when the door is
open.
Acoustic signal
Activates or deactivates the acoustic signal. By default, the signal is activated.
When the signal is activated:
1. The dryer will beep to indicate that the function button has been pressed.
2. If the programme button is turned while the dryer is running, the acoustic signal will remind the user
that this is an invalid operation.
3. When the drying programme is finished, a beep will sound.
Anti-wrinkle
At the end of the drying cycle, the crease prevention time is 30 minutes (default) or 120 minutes (se-
lected). This function prevents the laundry from creasing. Laundry can be removed during the crease
prevention phase.
Except for (Cold), (Wool) and (Refresh), all other programmes have this function.
My Cycle
Used to define and save your favourite, most frequently used programme.
1. Select the desired programme and other drying functions.
2. Press and hold (Light) for 3 seconds until a beep sounds and the desired programme is saved.
3. Turn the programme selector to position (My Cycle) and you can start your favourite programme. If
you want to change the setting (My Cycle), repeat steps (1) and (2).
Child Lock
1. This dryer is equipped with a special child safety lock, which can prevent children from inadvertently
pressing the buttons or performing an incorrect operation.
2. When the drying cycle is running, press the (Anti-wrinkle) and (Signal) buttons at the same time for 3
seconds to start the child lock function.
3. When the child lock function is activated, the display will show the child lock icon and all buttons will
be disabled except the (On/Off) button.
4. To deactivate the child lock function, press the (Anti-wrinkle) and (Signal) buttons at the same time
for 3 seconds.
39
infiniton.es
Publicidad
