Publicidad
6. Press the AC power switch on the left side of the machine to power on the
machine (Figure 4-6).
The mail stack can be placed on
the feeder while it is stopped,
but it will perform better if the
machine is on when the mail is
put on the feed belt. It is also
better to put the mail on the belt
without dropping or throwing it.
7. Put a handful of mail (approxi-
mately 25-50 pieces) flush
against the back of the feed
hopper and the side wall, and
then release the stack when the
front edge of the mail is ½ to ¾
of an inch above the transport
deck (Figure 4-7).
40
Omation® Series 210™ Envelopener® Operator Manual
Figure 4-6: AC power switch
Figure 4-7: Loading the Envelope
OPEX Corporation
Feed Hopper
Operation
Publicidad
