Control Elements; Mounting The Lcd Monitor - Waeco PerfectView M71L Instrucciones De Montaje

Mounting the LCD monitor

5.2

Control elements

The following control elements are located on the monitor:
No. in
fig. 0,
Description
page 6
1
2 –
3 +
4 M
5 V1/V2
6
6 Mounting the LCD monitor
Tools required (fig. 1, page 3)
6.1
For installation and assembly you will require the following tools:
Measuring ruler (4)
Centre punch (5)
Hammer (6)
Drill bit set (7)
Drill (8)
Screwdriver (9)
24
Description
Switches the monitor on and off.
Reduces the value of the selected parameter.
Increases the value of the selected parameter.
Calls up the parameters to be set in the
following order:
– Brightness („BRT")
– Colour („COL")
– Contrast („CON")
– "TINT" function
Not used in PAL format
– Picture format 16 : 9 or 4 : 3
Switches from video source 1 to video source 2
(V1 and V2) and vice-versa.
Receiver window for for IR remote control
PerfectView M71L